Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > RF/Microwave
 
 
RF/Microwave  

Soitec mass produces SOI substrates for cell phones

Posted: 22 Feb 2010     Print Version  Bookmark and Share

Keywords:Cell Phones  wafer resistivity  electrical 

After completing qualification at major customers for volume production in response to their rapidly growing demand, the Soitec Group (Euronext Paris) will commence the volume production of its new generation of state-of-the-art high-resistivity (HR) silicon-on-insulator (SOI) substrates to serve the growing cellular phone and Wi-Fi markets. Soitec has fine tuned its HR-SOI process to stabilise the base wafer resistivity in order to meet all cellular electrical specifications.

The shift to multi-band, multi-mode radio functionality in today's handsets and the growth of Wi-Fi based-applications is driving a move to SOI-enabled solutions, which can enhance integration and programmability while reducing cost-of-ownership in RF front end modules more effectively than competing technologies. Soitec's Smart Cut technology is used to integrate a high resistivity base wafer enabling low signal absorption below the oxide. This high-resistivity option for SOI wafers enables chip designers to reach unprecedented levels of RF and mixed signal integration, which will free up valuable area for the RF functions by a factor of ten on the board.

"Our HR-SOI capacity is in place to serve the growing cellular market demand," says Paul Boudre, chief operating officer, Soitec. "This new substrate generation enables chip designers to meet their demanding wireless performance requirements—low RF substrate loss, high isolation, high linearity—on very cost-effective silicon."

High-resistivity handle layers can also be combined with advanced SOI technologies that leverage a very thin top layer of silicon. Such wafers are excellent candidates for combining wireless functionality with lower power and higher speed logic on a single chip using a standard SOI CMOS process.

Manufactured in 200mm, Soitec's HR SOI substrates offer >1kΩ.cm resistivity, available in any custom silicon and box thickness. The company also offers HR SOI substrates in 300mm for the system on chip (SoC) market working at the 90nm node and below.





Comment on "Soitec mass produces SOI substrates ..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top