Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Microwave USB power sensor offers 60dB dynamic range

Posted: 18 Dec 2009     Print Version  Bookmark and Share

Keywords:microwave  USB  power sensor 

MA24126A power sensor

Anritsu Co. unleashes the MA24126A microwave USB power sensor capable of making highly accurate power measurements from 10MHz to 26GHz over 60dB of dynamic range. The sensor's "dual path" architecture provides True-RMS measurements over a broad frequency range and a dynamic range of 0.1µW to 100mW (-40dBm to +20dBm), enabling average power measurements on CW, multi-tone, and digitally modulated signals used in all major cellular and microwave point-to-point (P2P) bands, as well as aerospace and defence applications.

The MA24126A has built-in internal and external triggers, so the sensor can conduct multi-slot measurements of TDD waveforms used in GSM, WiMAX and TD-SCDMA. The triggering capability also allows the sensor to conduct burst power measurements of periodic and non-periodic waveforms. Its ability to handle +33dBm of power makes the MA24126A suited for conducting high crest factor signal measurements.

Precise average power measurements of modulated signals are assured due to the sensor design, which stores all calibration data directly in the sensor, so all necessary corrections, such as frequency and temperature, are done inside the microprocessor of the sensor. Also, the return loss of the instrument is optimised to maintain high accuracy. All standards used to calibrate the sensor are directly traceable to NIST, making the MA24126A well suited for aerospace and defence applications.

Versatile, the MA24126A can be used with Anritsu's handheld analysers, including the new E-series Site Master family, BTS Master, Spectrum Master, and VNA Master. It also is compatible with the MS271xB Economy Microwave Spectrum Analysers.

The MA24126A can be used as a stand-alone test solution when connected to a Windows-based PC via Anritsu's PowerXpert 2.0 data and analysis software. PowerXpert provides a front panel display that turns a PC into a highly advanced power meter. It allows users to drag gates and fences using a mouse, for interactive measurement capability. The software also supports simultaneous display of up to eight different sensors, and screen shots can be saved in popular image formats.

Field technicians can use the MA24126A with a compatible handheld analyser to verify base station and microwave P2P transmitter output power, as well as simultaneously monitor the power of several antennas on a continuous basis. The high performance of the MA24126A also allows it to be a cost-effective production test alternative for microwave component and sub-system manufacturers, system integrators, and base station and handset manufacturers.

The MA24126A has a delivery of two to three weeks ARO.





Comment on "Microwave USB power sensor offers 60..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top