Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Power managers support 2.8V - 3.96V range

Posted: 04 Dec 2009     Print Version  Bookmark and Share

Keywords:power manager  power management  hot swap application 

Power Manager II

Lattice Semiconductor has extended its second generation Power Manager II product family with two new higher-performance devices. Both the ispPAC-POWR1014-2 and ispPAC-POWR1014A-2 devices integrate higher voltage charge pumps with programmable current to control MOSFETs in hot swap and sequencing applications.

The new devices are pin compatible with existing Power Manager II devices, and integrate power management functions that typically require multiple ICs, including hot swap controllers, reset generators, voltage supervisors, sequencers and trackers. The ispPAC-POWR1014A-2 device also replaces ADC ICs used for power supply voltage measurements, controlled through a standard I²C interface.

"Compared to the cost of traditional single-function ICs, customers currently save up to 30 per cent when using our Power Manager II devices to integrate power management functions in a board with six or more power supplies," said Shyam Chandra, Lattice's product marketing manager for mixed-signal devices. "Now, with the integration of hot swap functionality, these new, higher-performance Power Manager II devices can save our customers up to 40 per cent."

The POWR1014-2 device integrates a 24 macrocell ruggedised PLD and dual-precision voltage monitoring comparators with an accuracy of 0.3 per cent. The POWR1014A-2 device also integrates a 10bit ADC for voltage measurements and an I²C interface that enables a microcontroller to read the status of all the comparators, inputs as well as outputs. Both the POWR1014-2 and POWR1014A-2 devices have been ruggedised to operate across a wide range of power supply voltages from 2.8V to 3.96V. These higher performance devices generate up to 12V using the on-chip charge pump, enabling integration of 5V hot swap controllers using MOSFETs with higher gate threshold voltages.

The ispPAC-POWR1014-2, due to its low cost and very small footprint, is suited to provide a complete board power management solution in consumer, telecom and automotive applications, including customer premises equipment, plasma display panel TVs and in-cabin multimedia. The POWR1014A-2 device addresses applications such as advanced mezzanine cards, PrPMC, base station line cards, Edge router line cards and servers that require power supply voltage measurement in addition to standard power management functions.

Designs for the ispPAC-POWR1014-2 and the ispPAC-POWR1014A-2 devices are implemented using the Windows-based Lattice PAC-Designer Software, Version 5.2.

High volume (250K+) pricing for the ispPAC-POWR1014-2 devices in the 48-pin TQFP package and industrial temperature range is Rs. 91.15 ($1.95), with the ispPAC-POWR1014A-2 devices priced 10 per cent higher. Samples are available now.

- Henri Arnold
EE Times Europe





Comment on "Power managers support 2.8V - 3.96V ..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top