Global Sources
EE Times-India
 
EE Times-India > EDA/IP
 
 
EDA/IP  

Guide to MMA7660FC board mounting

Posted: 15 May 2009     Print Version  Bookmark and Share

Keywords:MMA7660FC  sensor  accelerometer 

This application note by Freescale discusses board mounting guidelines and considerations for the MMA7660FC sensor. The first topic is the minimum recommended footprint for surface mount applications. This is a critical portion of design and if not done properly can affect soldering connection interface between the board and the package. The next topic is soldering and mounting guidelines, and considerations for the DFN accelerometer sensor to a PCB. These suggested methods will minimise the stress on the package after board mount. Following these guidelines and considerations for board mounting will result in better performance from the MMA7660FC sensor.

View the PDF document for more information.





Comment on "Guide to MMA7660FC board mounting"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top