Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Networks
 
 
Networks  

Mappers support EoPDH protocol over optical nets

Posted: 25 Mar 2009     Print Version  Bookmark and Share

Keywords:mappers  Ethernet services  optical networking  Ethernet-over-SONET/SDH 

DS33M30/DS33M31/DS33M33

Maxim Integrated Products has made available the DS33M30/DS33M31/DS33M33 integrated Ethernet-over-SONET/SDH (EoS) mapping devices.

The mappers merge new protocols for transporting Ethernet with the protocols of legacy optical networking, allowing service providers to deliver new Ethernet services using the existing optical transport infrastructure

The devices are touted to be the first monolithic SONET/SDH mapping ICs to support the Ethernet-over-PDH (EoPDH) protocol over optical networks. The DS33M31 and DS33M33 both have a 17mm x 17mm footprint, with the DS33M33 including three additional DS3/E3 add/drop interfaces. The DS33M30 lacks the DS3/E3 functionality, but is claimed to be the smallest EoS mapper at a mere 10mm x 10mm. All three devices require only a minimal number of external components to implement a complete Gigabit Ethernet to OC-3/STM-1 solution, and provide an ideal solution for Ethernet access equipment, multi-service provisioning platforms, microwave radios, and IP DSLAM uplinks.

The DS33M31/DS33M33 perform EoPDH mapping of Ethernet frames from a GbE interface into a DS3/E3 frame format, then use traditional SONET/SDH mapping techniques to place the DS3/E3 tributaries into an optical OC-3/STM-1. The merger of new and old protocols results in a technology known as Ethernet-over-PDH-over-SONET/SDH (EoPoS). When EoPoS technology is used, the optical transport network can manage a link as if it carried traditional PDH traffic. This results in the reuse of optical network equipment, provisioning systems, monitoring systems, and test equipment.

The DS33M31/DS33M33 not only support EoPoS mapping, but also the more traditional EoS mapping in virtually concatenated high-order containers, as does the DS33M30. The supported frame encapsulations include GFP-F, HDLC, cHDLC and X.86 (LAPS). These mappers have Ethernet OAM insert/extract capability, QoS priority scheduling, VLAN processing, and CIR policers for the delivery of variable-rate Carrier Ethernet services. They also have a 1000Mbps GMII Ethernet port, an Ethernet MAC, dual protected STS-3/STM-1 SerDes ports with LVDS/LVPECL interfaces, a GFP-F/HDLC/cHDLC/X.86 protocol encapsulator, a SONET/SDH mapper, a DDR SDRAM interface, and a local bus port for host control. The Serdes interfaces can be seamlessly connected to commercially available optical transceivers.

The DS33M30 is available in a 10mm x 10mm, 144-pin CSBGA package and the DS33M31/DS33M33 are available in a 17mm x 17mm, 256-pin CSBGA package, all specified over the -40°C to +85°C extended-industrial temperature range. Prices start at Rs.2,772.84 ($55.77) for the DS33M30, Rs.3,244.18 ($65.25) for the DS33M31 and Rs.3,604.64 ($72.50) for the DS33M33 (5,000-up, FOB USA). Design kits and software drivers are available to reduce design time.





Comment on "Mappers support EoPDH protocol over ..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top