Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Agilent rolls 5.7Mbps HSUPA data analysis

Posted: 23 Jul 2008     Print Version  Bookmark and Share

Keywords:HSUPA  W-CDMA/HSPA Test  Wireless Communications Test Set  test capability 

Agilent Technologies Inc. introduces a new 5.7Mbps HSUPA test capability for its W-CDMA/HSPA Test and Lab Applications, which run on the 8960 (E5515C) Wireless Communications Test Set. With the addition of the 5.7Mbps HSUPA test capability, Agilent's W-CDMA/HSPA one-box test set continues to provide the most standards-compliant RF measurements coupled with industry-leading data rate performance.

HSUPA is a 3G mobile telephony protocol in the HSPA family with uplink speeds up to 5.7Mbps. Also known as E-DCH (Enhanced Dedicated Channel), it is designed to extend and improve the performance of UMTS protocols by reducing latency and increasing uplink throughput. Agilent's E1963A W-CDMA/HSPA Test Application provides Radio Bearer and Frequency Division Duplex test modes and applicable 3GPP TS 34.121 HSUPA RF measurements for the latest HSUPA manufacturing and device verification. The addition of Agilent's new 5.7Mbps HSUPA test capability allows engineers to test all available Category 6 HSUPA-capable mobile devices and chipsets.

Agilent's E6703E W-CDMA/HSPA Lab Application features all the capabilities of the Test Application, while also adding packet-switched (PS) data connectivity for HSDPA Category 8/E-DCH Category 6 mobile devices. Engineers designing high-speed mobile data devices and applications can now use the Wireless Communications Test Set with the new 5.7Mbps HSUPA PS data capability to emulate real-world test scenarios. As a result, they can find difficult design problems earlier in the design cycle and then fix them more quickly.

"This new chipset-validated, 5.7Mbps capability is the latest in a series of features which today make the 8960 the most stable and easy to use one-box test set for verifying high-data rate mobile performance," said Niels Faché, vice president and general manager of Agilent's Mobile Broadband Division. "The addition of the 5.7Mbps HSUPA test capability reaffirms our commitment to deliver cost-effective, innovative and value-added solutions to support new and emerging communication technologies like HSPA."

The 8960 Test Set can be used for wireless device development, manufacturing and repair of all major 2G, 2.5G, 3G and 3.5G wireless technologies. It provides test solutions for mobile devices across the entire lifecycle on a single platform.

Agilent's new 5.7Mbps HSUPA test capability for the E1963A Test Application and E6703E Lab Application will be commercially available Q4. The 5.7Mbps capability in the E1963A Test Application requires the E1963A Test Application with options, 403 HSDPA and 413 HSUPA Test Modes.





Comment on "Agilent rolls 5.7Mbps HSUPA data ana..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top