Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > RF/Microwave
 
 
RF/Microwave  

RF signal generator designed for comms test

Posted: 20 Jun 2008     Print Version  Bookmark and Share

Keywords:RF signal generator  RF test process  wideband width modulation  multi-carrier test applications 

Aeroflex introduced the 3020C PXI modular digital RF signal generator, a 3GHz variant to the growing PXI signal generator line.

3020C PXI

Aeroflex's modular RF test platform, the PXI 3000 Series, has the bandwidth and versatility to seamlessly cover the entire RF test process—from R&D through to manufacturing—in any wireless market from cellular to military/aerospace to RFIC.

Designed for RF engineers performing communications test, the 3020C covers the frequency range of 1MHz to 3GHz, supporting applications in HF, VHF and UHF bands. The 3020C device has wideband width modulation up to 90MHz for broadband communications standards or multi-carrier test applications as well as RF output power from -120dBm to +6dBm.

"Aeroflex's configurable, scalable PXI 3000 Series RF measurement system set the industry benchmarks for flexibility, speed and performance of RF instruments," said Tim Carey, PXI product manager, Aeroflex test solutions. "We continue to evolve this revolutionary RF test platform, adding new modules and updating the software to extend the performance and flexibility for our customers."

As with all 3020 Series signal generators, the 3020C boasts excellent frequency and level settling times for high speed test applications and a built in dual-channel arbitrary waveform generator (AWG) for supplying complex modulated signals. The 3020C AWG is supplied with a generous 0.5GB of on-board memory supporting up to 128M x 16bit I and Q samples. The 3020C can perform high-speed switching in less than 250ms when in list mode, which minimises test setup time in automated systems and improves production throughput.

The 3020C is a lower cost option for wideband test applications below 3GHz than the flagship 3025C module, which offers the same high RF performance, but with an extended frequency range to 6GHz. Entry level modules 3020A and 3025 continue to provide the best economies for applications between 250MHz and 2.7GHz and 80MHz to 6GHz, respectively where RF modulated signal bandwidths of up to 28MHz are sufficient.

The 3020C is directly complimentary to the recently introduced 3030C wideband RF digitiser. Together, they support wideband signal generation and signal analysis for RF component and transceiver testing. The 3020C is used with the 3010 RF synthesiser, which provides a low phase-noise, highly agile local oscillator input, from which modulated and leveled RF output signals are derived. The 3020C is a PXIe (Hybrid compatible module) that can be fitted to PXI chassis' supporting standard cPCI, PXI-1 or PXI Hybrid slots.

Another major milestone achieved in the continual development of the innovative software-defined modular RF measurement platform, Aeroflex has updated the PXI 3000 Series software to further increase its test speed. Software updates include changes to module drivers, standard and optional measurement libraries and application software. This software is compatible with all Aeroflex 3000 Series PXI modules.

The 3020C PXI Modular Digital RF Signal Generator is available now.





Comment on "RF signal generator designed for com..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top