Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Amplifiers/Converters
 
 
Amplifiers/Converters  

Multicarrier WCDMA Feasibility (Part 3)

Posted: 22 Aug 2007     Print Version  Bookmark and Share

Keywords:WCDMA  transmit path  frequency error  power control 

This article is part of a series discussing the feasibility of implementing a multi-carrier transceiver for WCDMA or Wideband Code Division Multiple Access, a type of 3G cellular network, and discusses the key performance issues in the transmit path, including frequency error and power control.

There are several options for the architecture of the transmit path. Described is a direct-conversion architecture for an initial point of reference, as well as the transmit signal requirements. Throughout the discussion of architectures, it is assumed that there is a channel filter at the output of the power amplifier (PA) that is sharp enough so as not to desensitize the receive path and to ensure spurious emissions, when colocated, are filtered sufficiently.

View the PDF document for more information.





Comment on "Multicarrier WCDMA Feasibility (Part..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top