Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Embedded
 
 
Embedded  

Resistor manufacturers beef-up power lines

Posted: 17 Sep 2007     Print Version  Bookmark and Share

Keywords:metal-film resistors  power and heat factors  better heat dissipation 

While resistors come in many flavours, the two most commonly used for power applications are metal film and wirewound. The biggest challenge for resistor manufacturers is packing more power into the same package size, whether it's for use in small electronic devices or large industrial equipment. And while a higher power rating is desirable, it can cause an undesirable amount of heat generation.

Many engineers will still swear by outdated carbon compound resistors—despite availability issues and high price tags—for specific power applications because they are inductance-free. But for this discussion, the focus is on metal-film and wirewound resistors.

In the resistor world, the bigger the package, the more power the resistor can handle. But today's market increasingly demands smaller electronic products, which translates into a need for smaller components. Add to this mix requirements for better heat dissipation and tighter tolerance—which go hand-in-hand with more power—and you've got a big challenge.

Beefed-up power lines
Resistor manufacturers are beefing up their power lines to offer more power and better heat dissipation in same-size or smaller packages. In addition, several offer resistors that can operate at 275°C to withstand harsh environmental conditions, including those found in automotive and industrial applications. Others have developed heat-sink resistors and surface-mount packaging for these devices.

"The downsizing of standard electronic devices is forcing higher power to be dissipated in a smaller board space, so you need power resistors that can handle the higher power per square inch," said Kory Schroeder, product engineering manager for Stackpole Electronics.

Power rating vs. heat rise is also critical for characterisation, Schroeder said. The key concern with power resistors is meeting the upper limit of 105°C for PCB temperatures. Designers start to get nervous if the board heat approaches that temperature limit, he said.

In addition, more-efficient power supplies mean that resistors need to have tighter tolerances and better temperature coefficients of resistance. Before the miniaturization trend, tolerance wasn't critical, but designers now regularly request five per cent, Schroeder said.

On the flip side, industrial equipment is getting bigger and offering greater functionality, a trend that requires higher-power resistors, Schroeder said.

In general, the decision to use a metal-film or wirewound power resistor is determined by the power rating. If the requirement is below 5W, the typical choice is a metal-film resistor; above 5W, designers go with wirewound. That means that overlap applications are typically found at 5W.

KOASpeer's WK73 flat-chip resistor has better thermal-shock characteristics and high solder-joint solderability, thanks to its wide-terminal construction.

Product upgrades
These trends have led to new product developments over the past year.

Manufacturers such as Stackpole and BI Technologies have addressed the need for better heat dissipation. Stackpole retooled its HPC series with surface-mount devices in a 0.5inch² footprint capable of 5W of continuous power in free air. The parts use the same board space as typical 3W wirewound surface-mount devices. In addition, with 200lfm or 400lfm air movement, the power ratings improve to 10W and 12.5W, respectively, without exceeding a circuit board temperature of 105°C, Stackpole said.

Stackpole also introduced its RHC high-power, thick-film chip resistors in a 2512 package that can handle 2W. Designed with specialized materials and processes, the chip resistors run 30°C cooler than standard 2512 chips and exhibit solder-joint temperatures well below 105°C.

Stackpole also added 30W and 50W offerings to its TR series of TO-220 power-film resistors. This type of resistor is typically mounted along with other power ICs to a heat sink maintained at 25°C, which allows these small parts to dissipate large amounts of power.

Vishay offers the D2TO20 20W thick-film power resistor in an easy-to-mount TO-263 (D2PAK) package with resistance values from 0.01Ω to 500kΩ.

Meanwhile, the BHP75 series of 75W power resistors from BI Technologies uses three heat-dissipation methods. The series is housed in a TO-220 open-screened substrate package and features an insulated tapered venturi that's bonded to the substrate for maximum heat dissipation. The design forces hot air up the venturi and away from the resistor.

Still, more power is the name of the game.

KOA Speer Electronics Inc. has released the WK73 wide-terminal flat chip resistor, which offers higher power ratings and enhanced heat dissipation. The WK73S3A in a 1225 case size offers a 1.5W rating, compared with the company's RK73B3A in a 2512 case size with a 1W rating.

For accuracy and stability, MHP TO-247 power resistors from TT electronics plc's IRC Advanced Film Division are available in 100W and 140W packages. They exhibit very low inductance and low thermal resistance.

Stackpole now has 20-, 25- and 30W power film resistors in a surface-mount package. The company also added 100W and 250W offerings to its KAL aluminum-housed wirewound power resistors.

Resistors with the ability to withstand higher temperatures include offerings from TT electronics' IRC Wire and Film Technologies Division. The CCW axial wirewound, CAW wirewound and CAF film power resistors operate at up to 275°C. The IRC CMO metal oxide resistors, in standard and miniature sizes with power ratings from 0.25W to 9W at 70°C, offer a maximum operating temperature of 240°C.

Among the vendors achieving higher resistance and voltage ratings is Vishay Intertechnology Inc., whose RoHS-compliant D2TO20 20W thick-film power resistor has a resistance range of 0.01Ω to 500kΩ in a compact, TO-263 package.

- Gina Roos
eeProductCenter




Comment on "Resistor manufacturers beef-up power..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top