Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > RF/Microwave
 
 
RF/Microwave  

Dual-channel UART supports 8Mbps data rates

Posted: 18 Apr 2007     Print Version  Bookmark and Share

Keywords:dual-channel UART  RS-485 transceiver  industrial networking 

Exar released a dual-channel, 8bit UART with integrated RS-485 transceiver device family that can support up to 8Mbps data rates. The XR19L402/400 series targets industrial peripheral applications including point-of-sale, factory automation and industrial networking systems.

The series offers different packaging and modem interface options. Both devices can operate in four different modes: active, partial sleep, full sleep and power-save. Each mode can be invoked via hardware or software.

Upon power-up, the device is in the active mode where the UART and RS-485 transceiver function normally. In the partial-sleep mode, the internal crystal oscillator of the UART, or the charge pump of the RS-485 transceiver, is turned off. In full-sleep mode, both the crystal oscillator and the charge pump are turned off. While the UART is in the sleep mode, the power-save mode isolates the core logic from the control signals (chip select, read/write strobes, address and data bus lines) to minimise the power consumption. The RS-485 receivers remain active in each of these four modes.

The devices operate from a single 3-5.5V supply with data rates up to 8Mbps, while meeting all EIA/TIA-485 specifications. The configuration register set is "16550 UART" compatible for control, status and data transfer. The devices also have 64bytes of transmit and receive FIFOs, automatic RTS/CTS hardware flow control, automatic Xon/Xoff and special character software flow control, transmit and receive FIFO trigger levels, and a programmable fractional baud rate generator with a prescaler of divide by 1 or 4. Moreover, the devices include an ACP pin that allows the user to shut down the charge pump for the RS-485 drivers. In the UART portion, the Power-Save feature isolates the data bus interface to further reduce power consumption during sleep mode.

Samples of the product series are available. Pricing starts at around Rs.88 ($2) each in 1,000-piece quantities.

- Emily Gleason
eeProductCenter




Comment on "Dual-channel UART supports 8Mbps dat..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top