Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

BI Tech develops RoHS-complaint resistor network

Posted: 29 Nov 2006     Print Version  Bookmark and Share

Keywords:TT electronics BI Technologies Electronic Components Division  SCSI termination  resistor network  BB1020DTLF  low voltage differential 

Providing design engineers with a network device designed for the termination of high speed applications, TT electronics BI Technologies Electronic Components Division has released a RoHS-compliant SCSI termination resistor network. Designated as the BB1020DTLF, the low voltage differential (LVD) network is designed to terminate high performance SPI-2 (Ultra2) and SPI-3 (Ultra3) bussed applications.

According to Mike Torres, product manager for BI Technologies' Electronic Components Division, the BGA network design is optimised for minimal stray capacitance and exceptional high frequency performance. "This network utilises thick film resistors on a ceramic substrate with ball grid array terminals," said Torres. "The resistors and terminal balls are placed on the same side of the ceramic substrate, resulting in the absolute minimum stray capacitance and inductance characteristics."

As a result of the design, wide SCSI bus applications can be terminated with three BB1020DT Series networks and one linear regulator IC, Torres continued.

The BB1020DT Series networks feature 18 resistors with a nominal resistance of 475 ohms and nine resistors with a nominal resistance of 121 ohms. Absolute tolerance is ±one per cent, with TCR of ±100ppm/°C. Power rating is 1W per network at 70°C. Inter-lead capacitance is less than 0.1pF. And operating temperature range is -55°C to 125°C. BI Technologies will also produce devices outside these specifications to meet customer requirements.

The BGA network measures 0.20-by-0.45 inches, with solder balls on 0.05 inch centres. Each of the BB1020DTLF devices contains low voltage differential termination for up to nine lines. The termination network is surface mountable with automated pick and place equipment. The balls for the RoHS-compliant version utilise a copper core and are tin plated.

Typical pricing for the BB1020DTLF SCSI termination network is approximately Rs.31.86 (70 cents) each in quantities of 10,000 pieces, with lead times from stock to eight weeks.




Comment on "BI Tech develops RoHS-complaint resi..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top