Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Embedded
 
 
Embedded  

PWM buck controller employs ECM architecture

Posted: 07 Aug 2006     Print Version  Bookmark and Share

Keywords:National  LM3495  PWM controller 

National Semiconductor Corp. has introduced a PWM buck controller that employs the company's emulated-current-mode (ECM) architecture for output voltages with low duty cycles at frequencies up to 1.5MHz. The LM3495 powers digital ASICs, FPGAs, DSPs and other embedded processors. Deep sub-micron ICs require tight regulation accuracies in order to perform, and the new device promises accuracy of ±one per cent over a wide temperature range. This device also addresses the additional requirements of point-of-load (POL) module manufacturers with fault-protection features that ensure a reliable end product, National said.

The LM3495 expands National's power management portfolio, giving designers a choice between the company's ECM architecture and existing voltage-mode portfolio, the LM274x family. Both architectures allow designers to reach high operating frequencies and conversion ratios without having to deal with switching noise headaches, the company explained.

In addition to ECM control and accurate feedback voltage, National said the LM3495 has features that ease the design-in process while also ensuring reliable system performance. It has an input voltage from 2.9V to 18V for use in 3.3-, 5-, 12V and intermediate-bus systems, as well as an output voltage that is adjustable from 0.6V to 5.5V for existing and future core and I/O voltages. The controller has low-side sensing and a programmable current limit that does not require a sense resistor. This allows for reduced power dissipation, component count and system cost, the company said. In addition, the new device has input under-voltage lockout, switch-node short protection, adaptive duty cycle limit and hiccup-mode current limit protection that eliminates thermal runaway during fault conditions. It also has an internal soft start with tracking capability.

The LM3495 has a 200kHz to 1.5MHz switching frequency that can be synchronised to reduce radiated system noise. Its on-chip gate drivers are capable of driving FETs suitable for output currents in excess of 20A. It has soft shutdown and glitch-free start-up into pre-biased loads to ensure deep sub-micron cores are not damaged. The device, available in a TSSOP-16 package, operates from a single input rail, National said, eliminating the need for an external bias supply.

Already available, the LM3495 is priced starting at Rs.143.04 ($3.08) in 1,000-unit quantities.




Comment on "PWM buck controller employs ECM arch..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
Related Datasheets
Part Number Description Category
LM3495 Emulated Peak Current Mode Buck Controller for Low Output Voltage from the PowerWise® Family ICs, Interface

 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top