Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

AnalogicTech battery charger IC operates from USB port

Posted: 31 Jan 2006     Print Version  Bookmark and Share

Keywords:Advanced Analogic Technologies  AnalogicTech  battery charger IC  Gina Roos 

AAT3688 battery charger IC Advanced Analogic Technologies Inc. (AnalogicTech) has introduced a highly integrated battery charger IC designed to operate from USB port inputs. The AAT3688 features an innovative charge reduction loop that reduces charge time by automatically monitoring the USB port voltage and dynamically adjusting the current while the battery is charging. The function dramatically simplifies this task, allowing users to charge faster and more efficiently from the USB port by automatically adjusting for voltage sags and reducing the charge current as other functions on the host device consume more power.

A member of AnalogicTech's expanding BatteryManager product family, the compact AAT3688 integrates a charging device, reverse blocking diode, and current sensing circuit in a small 3-by-3mm TDFN package. Covering a 4V to 5.5V input range, the device is designed to regulate voltage and current for 4.2V Li-ion/polymer battery cells. Charge current on the AAT3688 can be programmed for two separate levels, USB High and USB Low, between 50mA and 500mA, depending upon port type.

To ensure safety and system reliability, the AAT3688 offers a number of safety features, including the ability to monitor battery temperature and charge state for fault conditions. If an over-voltage or over-temperature failure occurs, the device automatically shuts down to protect the charging device, the control system, and the battery under charge. Status monitor output pins can be used to directly drive two external LEDs to indicate battery status.

The AAT3688 also includes a serial interface output that reports any one of 14 status states to a microcontroller. While a growing number of portable devices are now designed to charge solely off a USB port, it is not a trivial task for designers to determine how much power other functions in the portable device are drawing from the USB source. Designers have typically taken an all-or-nothing approach and set arbitrary worst-case current budgets to maintain port integrity and protect the host system. AnalogicTech's AAT3688 dramatically improves and simplifies this task.

The AAT3688 is immediately available in a Pb-free, 12-pin, 3-by-3mm TDFN package and is rated over the -40°C to 85°C temperature range.

- Henri Arnold
Electronics Express Europe
eeProductCenter




Comment on "AnalogicTech battery charger IC oper..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top