Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Low dropout regulator features ramp control for FPGAs

Posted: 10 Jan 2006     Print Version  Bookmark and Share

Keywords:Bettyann Liotta  Micrel  low dropout regulator  ldo regulator  FPGA 

Micrel Inc. launched a 2A low dropout regulator featuring built-in sequencing, tracking and ramp control for low voltage FPGAs, DSPs and ASICs.

The LDOs were made for powering applications such as FPGA or ASIC core voltages that require high start-up current with lower nominal operating current including industrial, telecom, and high-end consumer (digital TV, LCD and plasma TVs) applications.

"This LDO is the only device on the market that offers a ramp control (RC) pin that provides control over voltage in ramp rate", said Ralf Muenster, Micrel's director of marketing for power products. "The MIC68200 eliminates the need to buy higher-priced, higher-current limited devices to address current overshoot at turn-on. Many systems require complex power up protocols and the MIC68200 enables the designer to implement sequential tracking as well as ratiometric power up and power down. In doing so, it can eliminate the need for more complex power management ICs."

The various power-up and power-down protocols such as sequencing, tracking, and ratiometric tracking can be implemented very easily with the use of very few passive components. The MIC68200 operates from a wide input range of 1.65V to 5.5V, including all of the main supply voltages commonly available today.

The MIC68200 incorporates a delay pin for control of power on reset output (POR) at turn-on and power-down delay at turn-off. In addition, there is a ramp control pin (RC) for either tracking applications or output voltage slew rate adjustment at turn-on and turn-off. This is crucial in applications where the load is highly capacitive and in-rush currents can cause supply voltages to fail and microprocessors or other complex logic chips to hang up, Muenster said.

Multiple MIC68200s can be daisy chained in either tracking or sequencing mode. The MIC68200 is fully protected offering both thermal and current limit protection and reverse current protection. It has a junction temperature range of -40°C to 125°C and is available in fixed voltages of 1.8-, 1.5-, 1.2- and 1V. There is also an adjustable option.

The MIC68200 is offered in a 10-pin 3-by-3mm MLF package. The MIC68200 is currently available in volume and pricing starts at Rs.73.75 ($1.63) for 1,000-unit quantities.

- Bettyann Liotta
eeProductCenter




Comment on "Low dropout regulator features ramp ..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top