Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Manufacturing/Packaging
 
 
Manufacturing/Packaging  

NEMS switches work like mechanical DRAM

Posted: 16 Dec 2005     Print Version  Bookmark and Share

Keywords:nanoelectromechanical system switches  debounce  colin johnson  cambridge university  samsung electronics 

Cooperating to make an all-nanotube switch, electrical engineers from Cambridge University and Samsung Electronics Co. Ltd have circumvented the nano-to-micro interface. By lithographically seeding silicon wafers for nanotube growth of source, drain and gate electrodes, the EEs formed three-terminal switches that function like mechanical DRAM and dubbed them nanoelectromechanical system (NEMS) switches.

"Our NEMS switch will be useful wherever there is a mechanical actuation stage needed at the end of some signal processing," said Professor Gehan Amaratunga, the lead EE on the Cambridge University team. Specifically, he said, the device can be used to switch routing connections on chips, as an alternative to on-chip fuses, for reconfiguration in a reversible manner and as an alternative to the silicon pillar structure now used as the base for capacitors in DRAM.

The nanotubes for the source and drain grow from seeds to a precise length at right angles to the silicon wafer surface. The source nanotube is pinned to ground with photolithography, while the drain is positively biased. The gate electrode, a shorter nanotube, switches the NEMS by introducing a positive voltage bias that repels the drain by electrostatic force.

When the voltage on the gate surpasses a threshold similar to the "on" gate voltage of a transistor, the drain nanotube bends and touches the oppositely charged source nanotube, thus throwing the mechanical switch and allowing current to flow from source to drain.

Making memory

Van der Waals forces then provide hysteresis to "debounce" the switch, keeping it "on" until the gate voltage drops below an "off" threshold.

To create a memory cell with the NEMS switch, the Cambridge researchers cooperated with Samsung to fabricate a complementary vertical capacitor structure to latch "on" states so that the gate voltage can be removed without switching the cell "off." By integrating the two into a vertical NEMS switch and latch, the researchers said, ultrasmall DRAM cells could result.

An advantage of the technique, Amaratunga said, is that ultrasmall single-walled nanotubes--akin to single-crystal silicon--are not necessary. Instead, the easier-to-grow and lower-tolerance multiwalled carbon nanotubes do just fine.

The researchers demonstrated how to trade off the electrostatic "on" switching force and the van der Waals "off" switching force by adjusting the process parameters that determined the length and thickness of the multiwalled nanotubes. By optimizing nanotube growth parameters, the researchers said, they demonstrate arrays of reliable, repeatable NEMS switches.

- R. Colin Johnson
EE Times




Comment on "NEMS switches work like mechanical D..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top